Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq

Girl's Snow Kamik Boots Snowbug3 Teal pgfYwSZq


  • Applies to: Grid
    • Difficulty: Easy
    • Time Needed: 10
    • Tools Required: Email account, Outlook
  • Applies to: All DV
    • Difficulty: Easy
    • Time Needed: 10
    • Tools Required: Email account, Outlook
Boots Teal Snowbug3 Girl's Kamik Snow

Introduction

This article is provided as a courtesy to our customers to help you configure your Outlook software to work with (mt) Media Temple's hosting solutions.

Third-party software can not be supported directly by (mt) Media Temple. If you have further questions about configuring Outlook, please visit http://support.microsoft.com/.

TIP:

Check out our automated tool for easy email set up! Automatically configure email clients on your PC, Mac, or iOS device with just a few clicks.

Requirements

Before you start, be sure you have these handy:

READ ME FIRST

This article is provided as a courtesy. Installing, configuring, and troubleshooting third-party applications is outside the scope of support provided by (mt) Media Temple. Please take a moment to review the Statement of Support.

READ ME FIRST

This article is provided as a courtesy. Installing, configuring, and troubleshooting third-party applications is outside the scope of support provided by (mt) Media Temple. Please take a moment to review the Statement of Support.

Configure Outlook 2016

1. Open Outlook 2016 and select Tools >> Add Account.

2. Select Other Email from the account types menu. 

3. Enter your email info into the form and click Add Account

  • Enter the email address that you're connecting to and it's associated password. If you don't know your email password, this article can help you reset it. 
  • Your user name is your full email address. 
  • Select POP3 or IMAP. We recommend IMAP. Learn more about the differences here.
  • Enter your access domain in the Incoming mail (POP3, IMAP) server field. It is advised that you also select 'Use SSL to connect'. This is a much more secure connection type. 
  • Enter your access domain in the Outgoing mail (SMTP) server field. It is advised that you also select 'Use SSL to connect'. This is a much more secure connection type. 

Boots Girl's Kamik Teal Snowbug3 Snow 4. Your email account should now be available for use in Outlook 2016. Please keep in mind that Outlook may takes several minutes to sync if you already have a large amount of mail on the server. 

Configure Outlook 2011

  1. Open Outlook 2011.
    • If this is your first time using Outlook 2011, you'll see a welcome banner like the one in Figure 1.


      Figure 1: Click image for a larger view.

    • If you are adding another email account to Outlook, from the top menu, click on Tools. Then click on Accounts. See Figure 2.


      Figure 2: Click image for a larger view.

  2. Click on the Email Account icon, see Figure 3.


    Figure 3.

  3. This window is where you enter your email information, see Figure 4 below.






    Figure 4:

    Enter your email account information in this window.
    • Enter Your Name as you want it to appear.
    • Enter your full email address username@example.com in the Email address: field.
    • Select POP3 or IMAP. We recommend IMAP. Learn more about the differences here.
    • Enter your access domain in the Incoming mail (POP3, IMAP) server: field.
    • Enter your access domain in the Outgoing mail (SMTP) server: field. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.
    • Enter mail.example.com in the Incoming mail (POP3, IMAP) server: field.
    • Enter mail.example.com in the Outgoing mail (SMTP) server: field. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.
    • Enter your full email address, username@example.com, in the User Name field.
    • Enter your email password in the Password: field.

    Snowbug3 Teal Girl's Snow Kamik Boots TIP:

    If you experience any difficulty with the default outgoing SMTP Port 25, you can check the box Kamik Snowbug3 Boots Snow Teal Girl's Override default port and enter 587 or an alternate port you enabled. We also strongly recommend using SMTP and port 465 with Outlook. For more information, please see: Women's Driver Platino Tassel Rodeo Cole Haan Glitter a5wqBaRTHow do I enable an alternate SMTP port?

  4. Next, we'll configure your Outgoing server settings. Click on the More Options... button. For Authentication, select Use Incoming Server Info. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections. Click OK to save your settings.



    Snow Kamik Snowbug3 Boots Girl's Teal Figure 5.

Configure Outlook 2010

1. Open Outlook 2010.

2. Click File, then Add Account. See Figure 1 below.


Figure 1: Click the "+Add Account" button to begin.

Enter your full email address and password. Outlook should automatically configure your account for you. If not, proceed to the next section.

Manually configure Outlook 2010

1. Open Outlook 2010.

2. Click File, then Kamik Girl's Snow Boots Teal Snowbug3 Add Account. See Figure 1 below.


Figure 1: Click the "+Add Account" button to begin.

3. Next, select Manually configure server settings or additional server types, then click Next. See Figure 2 below.


Figure 2: This will allow you to enter your account information.

4. In this screen, choose Internet E-mail, then click Next. Figure 3 below illustrates this window.


Figure 3: Be sure to select "Internet E-mail" then click the "Next" button.

5. This window is where you enter your email information, see Figure 4 below.



Figure 4: Enter your email account information in this window.

  • Enter Your Name as you want it to appear.
  • Enter your full email address username@example.com in the Email address: field.
  • Select POP3 or IMAP. Learn more about the differences here.
  • Enter your access domain in the Incoming mail (POP3, IMAP) server: field.
  • Enter your access domain in the Outgoing mail (SMTP) server: field. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.
  • Enter mail.example.com in the Incoming mail (POP3, IMAP) server: field.
  • Enter mail.example.com in the Outgoing mail (SMTP) server: field. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.
  • Enter your full email address, username@example.com, in the Girl's Kamik Teal Snow Boots Snowbug3 User Name field.
  • Enter your email password in the Password: field.

6. Perform the following steps:

  • Click on More Settings... see Figure 5 for the location of this button.



Figure 5: This will open a new window.

  • Click on the Outgoing Server tab. Check My outgoing server (SMTP) Requires Authentication. Make sure Use same setting as my incoming mail server is also checked. Click on OK. See Figure 6 as reference.


Figure 6: Be sure to confirm these settings.

7. Click the Test Account Settings button and you should see all items with green check marks... Click the Close Button to close the test window.
Click OK to save your settings.

Congratulations. You have finished the setup of your email account. Click Finish to close the setup wizard.

Configure Outlook 2007

  1. Open Outlook 2007.
  2. Click the Tools menu, and select Account Settings.

  3. Click on the Email tab and click on the New... button.

  4. Next select Microsoft Exchange, POP3, IMAP or HTTP and click Next.

Enter your full email address and password. Outlook should automatically configure your account for you. If not, proceed to the next section.

Manually configure Outlook 2007

  1. Select Internet E-mail option and click Next.

  2. Fill in the following fields:
    • Enter Your Name as you want it to appear.
    • Enter your full email address username@example.com in the Email address: field.
    • Select POP3 or IMAP.
    • Enter your access domain in the "Incoming mail (POP3, IMAP) server:" field.
    • Enter your access domain in the "Outgoing mail (SMTP) server:" field.
    • Enter mail.example.com in the "Incoming mail (POP3, IMAP) server:" field.
    • Teal Kamik Girl's Snow Snowbug3 Boots Enter mail.example.com in the "Outgoing mail (SMTP) server:" field.
    • Enter your username username@example.com in the "Account name:" field.
    • Enter your email password in the Password: field.

  3. Perform the following steps:
    • Click on More Settings...
    • Click on the Outgoing Server tab.
    • Check My outgoing server (SMTP) Requires Authentication.
    • Make sure Use same setting as my incoming mail server is also checked.
    • Click on OK.

  4. Click the Test Account Settings button and you should see all items with green check marks... Click the Close Button to close the test window. Click OK to save your settings.

  5. Congratulations. You have finished the setup of your email account. Click Finish to close the setup wizard.

If you are still having issues sending email, you can try the following:

  1. Click the Tools menu, and select E-mail Accounts.
  2. Highlight the email account and click Change.
  3. Click the Advanced tab, and change the SMTP port to the alternate port of 587 then click on OK.

Configure Outlook 2003

  1. Open Outlook 2003.
  2. Click the Tools menu and select E-mail Accounts....

  3. Click Add a new e-mail account and then click Next.

  4. Select POP3 or IMAP and click Next.

    TIP:

    (mt) Media Temple servers support POP3 and IMAP. Learn more: Using Email.

  5. Fill in the following fields:
    • Boots Kamik Girl's Snowbug3 Teal Snow Enter Your Name as you want it to appear.
    • Enter your full email address username@example.com in the "Email address:" field.
    • Enter your username username@example.com in the "Account Name:" field.
    • Enter your email password in the Password field.
    • Enter your access domain in the "Incoming mail (POP3, IMAP) server:" field.
    • Enter your access domain in the "Outgoing mail (SMTP) server:" field. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.

      NOTE:

      Your access domain is used to allow SSL encryption for your email.

    • Enter mail.example.com in the "Incoming mail (POP3, IMAP) server:" field.
    • Enter mail.example.com in the "Outgoing mail (SMTP) server:" field.
  6. Perform the following steps:
    • Click on More Settings...
    • Click on the Outgoing Server tab.
    • Check My outgoing server (SMTP) Requires Authentication.
    • Make sure Use same settings as my incoming mail server is also checked.
    • Click on OK.

  7. Click the Test Account Settings button and you should see all items with green check marks. Click Close to close the test window.

  8. Click Next to save your settings.

  9. Congratulations. You have finished the setup of your email account. Click Finish to close the Setup Wizard.

    Girl's Boots Teal Snow Kamik Snowbug3

Snow Teal Kamik Snowbug3 Boots Girl's

Configure Outlook Express and Outlook 2002

  1. Open Outlook or Outlook Express.
  2. Click the Tools menu, and select Accounts...
  3. Click Add and then click Mail...

  4. Enter your name in the Display name: field, and click Next.

  5. Enter your full email address (example: username@example.com) in the E-mail address: field and Click Next.

  6. Enter your access domain in the Incoming mail (POP3, IMAP or HTTP) server: field. Enter your access domain in the Outgoing mail (SMTP) server: field.
  7. Enter mail.example.com in the Incoming mail (POP3, IMAP or HTTP) server: field. Enter mail.example.com in the Outgoing mail (SMTP) server: field. You can also use your IP address. To avoid common authentication issues with Outlook, we strongly advise using SSL and port 465 for SMTP connections.

  8. Enter your username, username@example.com (same as your email address) in the Account name field. Enter your email password in the Password: field, and click Next.

  9. As for the Import screen: if you do not want to import information click Do not import at this time and click Next.

  10. Click on Finish. You MUST do the next steps to be able to send email via your server.

  11. Click the Tools menu, and select Accounts...

  12. Highlight mail.example.com under Account, and click Properties.

  13. Click the Servers tab, and check the box next to My server requires authentication. Then click on the Settings button.

  14. Verify the Login Information is set to use same settings as my incoming mail server then click OK.

  15. Click OK for the properties window now.

Troubleshooting

If you experience an issue sending email, you can try the following:

Click on More Settings...

Click the Advanced tab, and change the Outgoing server (SMTP) port to the alternate port of 465, with SSL encryption, then click on OK.


Port 587 is also available as an alternate (unencrypted) SMTP port for the Grid. However, Outlook may still persist with authentication errors if SSL is not used when sending mail.

Resources

More troubleshooting techniques can be found in the following article: Troubleshooting SMTP problems.